Osd-audio Soundsole 2.1 User Manual download pdf (Page 10)

SIMULATED SURROUND

The SOUNDSOLE 2.1 utilizes advanced Digital Signal Processing (DSP) to create simulated

surround sound from a stereo speaker configuration. The SOUNDSOLE 2.1 simulated

surround can also be used for music (Effect button #2, Studio).

Press the #1 Effects button (labeled Cinematic) on the SOUNDSOLE 2.1 IR Remote to turn

the simulated surround ON if you want simulated surround while watching a Video. The Front

panel Status LED will flash once.

Press the same Effects button (#1) on the SOUNDSOLE 2,1 IR Remote to turn the simulated

surround OFF. Front panel Status LED will flash once. Do the same when listening to the

DSP effects #2 (Studio) when listening to music and you want to turn the effect off.

PAIRING AND SELECTING A BLUETOOTH SOURCE

The SOUNDSOLE 2.1 will pair without the need to enter a code, if the device implements Bluetooth v2.1 or later.

Legacy pairing is the only method available for Bluetooth v2.0 and older. Each device must enter a PIN code:

‘0000’ to complete pairing. To ensure that your device is compatible, look for the Bluetooth Music Icon on the

packaging, or go to: www.gadgetguide.bluetooth.com

PAIRING A BLUETOOTH DEVICE

1. Turn the SOUNDSOLE 2.1 and the Bluetooth device ON.

2. Press the button on the SOUNDSOLE 2.1 IR Remote to select the Bluetooth Input. The front panel Status LED

flash twice, delay then repeat.

3. On the device to be paired to the SOUNDSOLE 2.1, turn Bluetooth ON. The Bluetooth controls are typically

found in the device’s ‘Settings’ or ‘Connections’ menu. If the Bluetooth device has previously been paired with the

SOUNDSOLE 2.1, and the SOUNDSOLE 2.1 has not been removed from the list of discovered devices, the

Bluetooth device should automatically sync with the SOUNDSOLE 2.1. (Front panel Status LED solid blue.)

4. Press the button on the SOUNDSOLE 2.1 IR Remote for a Bluetooth device that has not been paired with the

SOUNDSOLE 2.1, or the SOUNDSOLE 2.1 has been removed from its list of discovered devices. The

SOUNDSOLE 2.1 will output a sync code that will be received by the Bluetooth device. The front panel Status

LED will flash rapidly until the Bluetooth device accepts the BT Code and pairs to the SOUNDSOLE 2.1.

5. The device will appear in the Bluetooth setup screen on the device being paired.

6. The device should sync to the SOUNDSOLE2.1. The front panel Status LED will stop flashing and illuminate solid

blue.

7. If switching between hardwired sources and a paired Bluetooth device, the Bluetooth device will remain

‘connected’ as long as the device has not been turned OFF or moved out of Bluetooth range. If the Bluetooth device

has been turned OFF, simply turn it ON, navigate to the device’s Bluetooth setup and sync to the SOUNDSOLE 2.1

OSD Audio

SOUNDSOLE 2.1

FRONT PANEL

Bluetooth Status LED

OSD Audio · 775 Columbia Street · Brea, CA 92821 · Tel: (562) 697-2600 · www.osdaudio.com

Page 10

1 2 ... 5 6 7 8 9 10 11 12

No comments

Osd-audio Soundsole 2.1 User Manual Page 10